Mobile phone: 138 2372 9802
Telephone: 0755-27156107
Fax: 0755-27156106
Email address: allgreat@126.com
Address: 701, No.68, Minsheng Road, Shangcun Community, Gongming Street, Guangming New District, Shenzhen
CUP Preload pressure type booster
lt doesn't bring high temperature andnoise.Branded,fusion,testing,shearing,etc...
How to order
Specification
model | CUP-01 | CUP-03 | CUP-05 | CUP-10 | CUP-20 |
Piping diameter | PT1/4" | PT1/4" | PT3/8" | PT1/2" | PT1/2" |
working frequency | 6 times/min | ||||
Working pressure range | 1~7.0Kgf/cm² | ||||
structure | look-ahead | ||||
working medium | Compressed air (filtered by 40u filter) | ||||
temperature range | 5°C~40°C | ||||
Z maximum pressure resistance | 7.0Kgf/cm² | ||||
circulating oil | 32~68# Anti-wear hydraulic oil | ||||
作動原理
●作動原理:利用氣壓源轉换成高能量之油壓出力。
●說明
1.通電電磁閥(1)，增壓缸走預行程。
2.通電電磁閥(2)， 增壓缸走增壓行程。
3.同時斷開電磁閥(1)，(2)的電源，增壓缸回到復歸狀態
Dimension
CUP-01-dimension
Size table
Theoretic force
CUP-03-dimension
Size table
Theoretic force
CUP-05外形尺寸圖
Size table
Theoretic force
CUP-10-dimension
Size table
Theoretic force
CUP-20-dimension
Matters needing attention
booster cylinder actuator, recommend the use of pressure standards for 5Kgf/cm2.The air pressureis too small will cause the pressure is not enough.The air pressure is too large (more than 5Kg/cm2),long time will shorten the life of actuating pressure cylinder.The gas pressure exceeds 7Kgf/cm2,will cause unimaginable consequences.
booster cylinder standard installation for vertical installation, if you require other installation,when ordering please with the sales staff consultation.
The work environment is suitable for the general indoor ground, not suitable for outdoor and withcorrosion, dust, high temperature and other special ground.
supply equipment power source, treatment should be well filtered dry and lubricated.The gas supplypipeline is too small will cause great pressure, water or pipeline is not clean, influence of hydraulic oilquality or damage the seal performance action after a long time, cause the equipment performancedegradation.
The habit of attention can form the height of liquid level, liquid level exceeds the limit will causethe hydraulic oil discharge phenomenon, the hydraulic oil is lower than the lower limit will causethe phenomenon of pressure is not enough and lack of stroke.
The amount of oil added: when the liquid is close to the lower limit, should be immediately addedhydraulic oil, normal consumption:
High frequency: 1~3 monthseneral use: 3~6 months
Low frequency of use: 6~12 monthsadd oil matters needing attention:
1.should choose reputable original authentic, according to the selection of 32#~68# hydraulic oil;2.According to add the hydraulic oil, the oil oil cover can be gently rotating, without a toollock twisting.The shaft end load does not exceed the return force 50%,less influence of actuating speed.
Quick navigation
